Skip to Content
Björn Tech
Telecommunications

From Subrack to Edge Server: Engineering for Telecom Networks

Base StationsNetwork SwitchingFibre Optic DistributionData Transmission Equipment
Telecommunications

Electronics for Networks That Never Go Down

From base stations to network switching infrastructure, fiber optic distribution systems to data transmission equipment, telecommunications electronics demand specialized packaging solutions in terms of high reliability and long service life requirements.

Björn Tech brings POLYRACK subracks, backplanes and system monitoring together with Innodisk's server storage, memory, network modules and Innodisk APEX edge AI systems. From the rack in the central facility to the edge site, every system is built from components whose fit has been planned from the start.

Recommended in this sector:

  • POLYRACK: Future and FrameTech subracks; CompactPCI Serial and PSB 2.16 backplanes; power backplane; FT 01/02 rack fan; SMC3 (monitors 6 fans, 8 voltages, 8 temperatures).
  • Innodisk: PCIe Gen4 SSD 4TS2-P / 4TS3-P (power-loss protected); EGPL-T102 10 GbE and PoE modules; DDR5 server memory; APEX-S100 (2U) and APEX-X100-Q (Qualcomm Cloud AI 100 Ultra): inference at the edge.

Telecom Requirements at a Glance

Areas of use Base stations, network switching, fibre optic networks, data transmission equipment and edge sites
Operation 24/7 for many years, often at unattended sites
Environment Central facilities and field cabinets, each with its own protection class and EMC requirements
Mechanics 19" subracks and enclosures with EMC-ready plug-in units
Backplanes CompactPCI Serial with 10G Ethernet, CompactPCI with Gigabit Ethernet, PICMG 2.11 power backplanes
System monitoring Fans, voltages and temperatures; automatic shutdown at overtemperature and remote control
Edge computing 2U short-depth AI servers, storage with power-loss protection, 10 GbE and PoE
Scope of supply Subrack, backplane, power, cooling, monitoring, storage, memory and edge AI from one supplier

Always On, Everywhere

  • High reliability

    Network infrastructure has to run without interruption; an equipment failure turns directly into a service outage.

  • Long service life

    Telecommunications equipment stays in service for many years; its mechanical infrastructure must remain supportable throughout.

  • Field and central facility conditions

    The same equipment may run in field cabinets and in central facilities, each with its own protection class and EMC requirements.

  • High data rates

    Network components need a reliable backplane and connection infrastructure for high-speed data transmission.

  • Unattended sites

    Base stations and field cabinets run with no staff on site. Fans, voltages and temperatures have to be watched remotely, and the system has to protect itself when cooling fails.

  • AI at the network edge

    5G and edge services process data close to users. Edge sites and regional data centres need server-class AI in short-depth racks.

  • Compact edge equipment

    Compact edge boxes have no room for expansion cards. Storage and network ports have to fit into M.2 slots, and cameras and access points should be powered over the network cable.

Racks, Enclosures and Cooling for Telecom

POLYRACK's 19" subracks have been a standard building block of telecommunications infrastructure equipment for many years. The subrack and enclosure lay the mechanical, EMC and protection-class foundation for field cabinets and central facilities; CompactPCI Serial and PSB 2.16 backplanes carry the data between the boards; power backplanes, fan units and SMC3 monitoring keep the shelf powered, cooled and under watch at sites where nobody is present.

At the network edge, Innodisk completes the system: data-centre SSDs with power-loss protection, server memory for short-depth systems, 10 GbE and PoE modules for compact edge boxes, and Innodisk APEX servers that run AI inference close to users.

The result: one bill of materials, one technical contact and a platform that can be extended and adapted over years of service.

  1. 01 Subracks and Enclosures The mechanical, EMC and protection-class foundation, from the rack in the central facility to the field cabinet. POLYRACK
  2. 02 Backplanes and Data Paths Ethernet-based backplanes carry the data between the boards of packet-switched systems. POLYRACK
  3. 03 Power, Cooling and Monitoring At unattended sites the shelf needs steady power, monitored airflow and a system that protects itself. POLYRACK
  4. 04 Storage and Network Interfaces Data-centre storage and extra network ports for edge servers and compact edge boxes. Innodisk
  5. 05 Edge Servers and AI Server-class computing and AI inference at edge sites and regional data centres, close to users. Innodisk

The Telecom System, Layer by Layer

Each card shows the product's role in the telecom system and the expectations it answers; the product's own page has the full specifications. 14 products across 5 layers are recommended: POLYRACK (8), Innodisk (6).

01

Subracks and Enclosures

The mechanical, EMC and protection-class foundation, from the rack in the central facility to the field cabinet.

02

Backplanes and Data Paths

Ethernet-based backplanes carry the data between the boards of packet-switched systems.

03

Power, Cooling and Monitoring

At unattended sites the shelf needs steady power, monitored airflow and a system that protects itself.

04

Storage and Network Interfaces

Data-centre storage and extra network ports for edge servers and compact edge boxes.

05

Edge Servers and AI

Server-class computing and AI inference at edge sites and regional data centres, close to users.

The Manufacturers Behind the Network Hardware

POLYRACK Electronic-Aufbausysteme GmbH

19" SubrackEnclosuresPanel PCCompactPCI / VMEbus / OpenVPX45+ Years of Experience

With POLYRACK Electronic-Aufbausysteme GmbH, we offer integrated packaging solutions for the widest range of applications in the electronics industry. With more than 45 years of engineering expertise and relationships of trust with the world's leading electronics brands, POLYRACK operates on a global scale, from Europe to Asia and from North America to the Turkish market.

The product range covers 19" subrack and enclosure families, industrial PC and panel PC systems, CompactPCI / VMEbus / OpenVPX backplanes, DIN rail modules and customer-specific system platforms. Custom designs developed on the basis of standard catalogue products combine the cost advantage of series production with the flexibility of individual customer requirements. POLYRACK has a multi-technology manufacturing infrastructure including metal and plastic processing, aluminium extrusion and die-casting, plastic injection moulds, surface treatment, electronic assembly and logistics.

POLYRACK Industrial Products

Innodisk

Industrial SSDDRAM ModulesCamera ModulesNetwork CardsEdge AI Systems

With Innodisk, we offer industrial-grade flash storage, DRAM modules, embedded camera modules, network and I/O expansion cards and edge AI systems. Founded in Taiwan in 2005, Innodisk designs its products for extreme temperatures, shock and vibration, unstable power and long product life cycles; we integrate them into the enclosures and thermal solutions of our other brands.

Innodisk Products

Why Björn Tech?

From Subrack to Server, One Contact

Mechanics, backplanes, monitoring, storage and edge AI in one order, with one technical contact from design to delivery.

Custom Development

Subrack dimensions, backplane slot counts and plug-in units are adapted to your design, with technical consultancy for telecom infrastructure projects in Türkiye.

Supportable for Years

Modular subracks with a wide accessory range and fixed bills of materials let you extend and maintain installed network equipment for years.

Talk to our engineering team about your project.

Contact Us

Other Sectors