Innodisk Product Group

Flash Storage

Industrial Flash Storage

Industrial SSDs are designed for what consumer drives are not: -40 ~ 85 °C operation, sudden power loss, constant logging and a fixed bill of materials for years. iSLC firmware multiplies endurance, iPower Guard and iCell protect data at power loss, and the InnoRobust line adds military-grade erase and write protection.

From PCIe and SATA SSDs to boot modules, removable cards and USB drives, the same protection technologies run through every form factor, including InnoREC drives for continuous video recording.

SectorsIndustrial Industrial Automation Medical Defence Industry Railway & Transportation Multimedia & Broadcasting Green Energy Measurement & Control Telecommunications E-Mobility

All Flash Storage (innodisk.com) Selection Guide (PDF, innodisk.com)

PCIe SSD

PCIe Gen4 · M.2 2230 / 2242 / 2280

M.2 PCIe Gen4 4TE3 / 4IE3

Industrial NVMe SSD family for embedded systems and edge AI in three M.2 lengths; 4IE3 adds iSLC endurance for write-intensive applications.

iPower Guard against unstable power; iCell PLP on M.2 2280
Standard 0 ~ 70 °C or wide -40 ~ 85 °C
Heatsink options for sustained performance

Interface	PCIe Gen4 x4, NVMe
Form factors	M.2 2230, 2242, 2280
Capacity	4TE3 128 GB ~ 2 TB · 4IE3 (iSLC) 40 GB ~ 640 GB
Sequential R/W	Up to 3,700 / 3,300 MB/s
Temperature	0 ~ 70 °C or -40 ~ 85 °C

Datasheet and Downloads All Models in This Category

PCIe Gen4 · M.2 and U.2 · Ultra iSLC

M.2 PCIe Gen4 4TE2 / 4IG2-P

PCIe Gen4 NVMe SSDs for manufacturing, retail and transportation systems: 4TE2 in compact M.2 lengths with iCell options, 4IG2-P with Ultra iSLC for up to 100,000 P/E cycles.

4TE2: M.2 2230, 2242 and 2280; power-loss protection (iCell) on selected models
4IG2-P: Ultra iSLC with up to 100K P/E cycles, 33 times the lifespan
-40 ~ 85 °C with dynamic thermal throttling

Interface	PCIe Gen4 x4, NVMe 1.4
Form factors	4TE2 M.2 2230 / 2242 / 2280 · 4IG2-P M.2 2280 / 22110, U.2
Capacity	4TE2 128 GB ~ 2 TB · 4IG2-P 160 GB ~ 1.28 TB
Sequential R/W	4TE2 up to 3,550 / 3,300 · 4IG2-P up to 6,900 / 4,350 MB/s
Temperature	-40 ~ 85 °C

Datasheet and Downloads All Models in This Category

PCIe Gen3 · M key or B+M key

M.2 PCIe Gen3 3TE8 / 3IE8

Cost-efficient PCIe Gen3 SSDs on BiCS5 3D TLC for platforms that need B+M key compatibility or lower power.

iSLC version with up to 640 GB for heavy write loads
Low power: 3.1 ~ 4.6 W maximum

Interface	PCIe Gen3 x4 (M key) or x2 (B+M key)
Form factors	M.2 2242, 2280
Capacity	TLC 128 GB ~ 2 TB · iSLC 40 GB ~ 640 GB
Sequential R/W	Up to 3,400 / 2,850 MB/s
Temperature	0 ~ 70 °C or -40 ~ 85 °C

Datasheet and Downloads All Models in This Category

One-click system recovery

InnoOSR 3TO8 / 3TO7

SSDs with Innodisk's patented one-click recovery: the operating system is restored on site with a button or a GPIO signal, or remotely through the cloud, without a technician.

Local recovery on site, cloud recovery remotely
Suited to kiosks, signage, broadcasting and solar tracking systems

Interface	3TO8 PCIe Gen3 x4 · 3TO7 SATA III
Form factors	M.2 2280 (3TO8) · M.2 2242 / 2280, 2.5" (3TO7)
Capacity	3TO8 128 GB ~ 2 TB · 3TO7 32 GB ~ 2 TB
Sequential R/W	3TO8 up to 3,550 / 2,700 MB/s

Datasheet and Downloads All Models in This Category

PCIe Gen3 x2 · removable

CFexpress 4TE3 / 4IE3

Removable NVMe storage for mission data, recorders and cameras, with a hardware write-protect switch.

Ultra iSLC version for high endurance
Hardware write protect and iPower Guard

Interface	PCIe Gen3 x2, 21-pin
Capacity	4TE3 128 GB ~ 2 TB · 4IE3 40 GB ~ 640 GB
Dimensions	29.6 × 38.5 × 3.8 mm

Datasheet and Downloads All Models in This Category

SATA SSD

SATA III · 2.5"

2.5" SATA SSD 3TE7 / 3IE7 / 3TEA

The workhorse industrial SATA SSD for IPCs, panel PCs and embedded systems, from 20 GB iSLC to 2 TB 3D TLC.

iSLC version (3IE7) for write-intensive logging
iCell power-loss protection on 3TEA
Same series also in M.2, mSATA, SATA Slim, SATADOM and CFast

Interface	SATA III 6 Gb/s
Capacity	3TE7 32 GB ~ 1 TB · 3IE7 20 GB ~ 320 GB · 3TEA 128 GB ~ 2 TB
Sequential R/W	Up to 560 / 525 MB/s
Temperature	0 ~ 70 °C or -40 ~ 85 °C

Datasheet and Downloads All Models in This Category

SATA III · 2.5" · up to 8 TB

2.5" SATA SSD 3TG8-P

High-capacity 2.5" SATA SSD from 1 TB to 8 TB for video storage, recorders and archives, with iCell power-loss protection and -40 ~ 85 °C support.

End-to-end data path protection and iData Guard
AES and TCG Opal 2.0 encryption

Interface	SATA III 6 Gb/s
Capacity	1 TB ~ 8 TB
Sequential R/W	560 / 520 MB/s
Endurance	Up to 17,643 TBW
Temperature	-40 ~ 85 °C

Datasheet and Downloads All Models in This Category

Surveillance · InnoREC

InnoREC SSD 3TV6-P / 3MV2-P

SATA SSDs for video recording: the exclusive RECLine keeps write performance steady so that no frames are lost, in 2.5", M.2, mSATA, SATA Slim and CFast.

RECLine for steady video recording without frame loss
Built-in thermal sensor; S.M.A.R.T., TRIM, NCQ and iData Guard
iCell power-loss protection on 2.5" models

Interface	SATA III 6 Gb/s
Form factors	2.5", M.2 2280, mSATA, SATA Slim, CFast
Capacity	3TV6-P 128 GB ~ 4 TB · 3MV2-P 8 GB ~ 2 TB
Sequential R/W	Up to 560 / 460 MB/s
Flash	3D TLC (3TV6-P) · MLC (3MV2-P)

Datasheet and Downloads All Models in This Category

Rugged · secure · MIL-STD-810F

InnoRobust SATA SSD 3TR6-P

Rugged SATA SSD for defence and mission-critical systems: encryption, military-standard erase, destroy and write protect, iCell power-loss protection and conformal coating.

Quick Erase, Secure Erase (DoD 5220.22-M, NSA 130-2, US Army 380-19, IRIG 106 and more) and Destroy
Hardware or software write protect via pin header or ATA command
MIL-STD-810F shock (Method 516.5) and vibration (Method 514.5)
MIL-I-46058C conformal coating, thermal sensor, iData Guard

Interface	SATA III 6 Gb/s
Form factors	2.5", family also in M.2 and mSATA
Capacity	128 GB ~ 2 TB
Security	AES, TCG Opal, Quick / Secure Erase, Destroy, write protect
Protection	iCell PLP, conformal coating

Datasheet and Downloads All Models in This Category

SATA III · M.2 2242 / 2280

M.2 SATA SSD

M.2 SATA drives for boards without NVMe support, from SLC and iSLC for maximum endurance to 3D TLC up to 4 TB, with iCell on selected models.

3TE7 / 3IE7 / 3TG6-P / 3TS9-P and SLC / MLC series
B+M key, compatible with most embedded boards

Interface	SATA III 6 Gb/s
Form factors	M.2 2230, 2242, 2260, 2280
Capacity	4 GB ~ 4 TB
Flash	SLC, MLC, iSLC, 3D TLC

Datasheet and Downloads All Models in This Category

SATA disk-on-module

SATADOM

Plugs directly into the motherboard's SATA port as a boot and OS drive for servers, thin clients and appliances, saving a drive bay and cabling.

SL, SH, SV, ML/MH and MV types for different board layouts
Cable-less power options

Interface	SATA III 6 Gb/s
Capacity	8 GB ~ 512 GB
Flash	3D TLC, iSLC, MLC, SLC

Datasheet and Downloads All Models in This Category

SATA III · mSATA and SATA Slim

mSATA and SATA Slim

Compact SATA modules for embedded boards and legacy platforms, up to 2 TB, with iCell on mSATA 3TEA / 3TE7.

mSATA, mSATA mini and SATA Slim form factors

Interface	SATA III 6 Gb/s
Capacity	8 GB ~ 2 TB
Flash	3D TLC, iSLC, MLC, SLC

Datasheet and Downloads All Models in This Category

SATA III · removable

CFast

Removable SATA storage for gaming machines, medical devices and industrial HMIs, from 8 GB SLC to 2 TB 3D TLC.

3TEA / 3TE7 / 3IE7 / 3SE4 / 3ME4 / 3IE4 series

Interface	SATA III 6 Gb/s
Capacity	8 GB ~ 2 TB
Flash	3D TLC, iSLC, MLC, SLC

Datasheet and Downloads All Models in This Category

SD, microSD and USB

SD and microSD · industrial

Industrial SD and microSD

Industrial SD and microSD cards for data logging, cameras and IoT gateways; the iSLC versions last far longer than consumer cards.

3D TLC and iSLC (3TE4 / 3IE4), SLC and MLC versions

Standard	SD 3.0 / 6.1
Capacity	SD up to 256 GB · microSD up to 512 GB
Flash	3D TLC, iSLC, MLC, SLC

Datasheet and Downloads All Models in This Category

USB 3.0 · internal and external

USB Drives and USB EDC

USB modules that plug into an internal 9-pin header (EDC, horizontal or vertical) or a USB port, for boot images, logging and service tools.

SLC, MLC and iSLC versions

Interface	USB 3.0 (EDC H 2ME3 USB 2.0)
Connector	9-pin 2.54 mm header or USB-A
Capacity	4 GB ~ 128 GB

Datasheet and Downloads All Models in This Category

Why Björn Tech?

One Integrated System

We combine Innodisk storage, memory and I/O with POLYRACK enclosures and our thermal management partners in a single, tested system.

The Right Grade for the Application

Together with you we choose the temperature grade, form factor, endurance and protection features the application really needs.

Long-Term Supply

Innodisk's long-term supply and fixed-BOM options support products that stay in the field for years.

Talk to our engineering team about your project.