Skip to Content
Björn Tech
Medical

Highest Reliability Standards in Medical Technology

Patient MonitoringEmergency VentilationSurgical EquipmentImaging SystemsLaboratory DevicesHome Care Systems
Medical

Patient Safety Starts With Electronics

Medical electronic devices rank among the most demanding applications in electronic packaging — due to patient safety requirements and long product lifecycles. From emergency ventilation to patient monitoring, surgical equipment to home care devices, every system must simultaneously meet hygiene, EMC compliance, and reliable thermal management requirements. Björn Tech provides POLYRACK mechanical enclosure solutions alongside Pada Engineering and Sheen thermal products under one roof, offering medical device manufacturers end-to-end engineering and supply chain support.

Recommended in this sector:

  • POLYRACK: IPC02 (all stainless steel, resistant to cleaning and sterilisation); EmbedTech SFF (all-metal enclosure); PanelPC 2 (IP65 front, 10.1"–21.5" touch).
  • Pada: Liquid cold plate: draws heat from imaging amplifiers, power supplies and lasers.
  • Sheen: Thermal Film (breakdown voltage above 4 kV AC) and silicone-free thermal pad (no silicone-oil migration): power-supply insulation and heat interface.
  • YCC Fan: DC axial and blower fans: low-noise cooling for portable and densely packed devices.
  • Innodisk: M.2 SATA SSD, RAID expansion and DDR5 memory (record and image data); USB 2.0 camera modules; APEX-P100 and APEX-P200 (image interpretation beside the device, no data to the cloud).
  • Aetina: AIP-FR68 (agent-based AI in the examination room); AIP-SQ67 + M3A2000-VY MXM (3D surgical imaging).

Medical Requirements at a Glance

Areas of use Patient monitoring, emergency ventilation, surgery and intensive care, imaging, laboratory and home care
Key requirements Hygiene, EMC compliance, reliable thermal management, long product life
Mechanics Stainless steel and metal enclosures, panel PCs with IP65 front; desktop, VESA, DIN rail or wall mounting
Cooling Liquid cold plates and heat sinks, insulating and silicone-free interface materials, DC fans sized for the noise target
Patient data iSLC SSDs, RAID 1 mirroring, ECC memory and image analysis on the device
Experience 45+ years · POLYRACK TECH-GROUP
Supply 5 brands, one supplier · POLYRACK · Pada · Sheen · YCC Fan · Innodisk

The Clinical Environment Allows No Errors

  • Hygiene and cleanability

    Devices in clinical environments must withstand frequent cleaning and sterilisation; enclosure materials and surfaces have to be chosen accordingly.

    Our answer IPC02PanelPC 2

  • EMC compliance

    Sensitive electronics such as patient monitors and imaging systems must be shielded against electromagnetic interference and must not emit interference themselves.

    Our answer IPC02EmbedTech SFF

  • Reliable thermal management

    High heat-density components such as medical power supplies, imaging amplifiers and laser modules need efficient cooling for uninterrupted operation.

    Our answer Liquid Cold PlatesThermal FilmSilicone-Free Thermal Pad

  • Quiet operation near patients

    In intensive care, at the bedside and at home, fan noise disturbs patients; cooling has to be sized for a noise target.

    Our answer DC Axial FansDC Blower Fans

  • Compact and portable devices

    Emergency, home care and cart-mounted devices leave little room and often run on batteries; every component has to fit the space and power budget.

    Our answer EmbedTech SFFDC Axial FansAPEX-P200

  • Protecting patient data

    Logs, images and measurement results must not be lost or corrupted, even when a drive fails.

    Our answer M.2 SATA SSDStorage and RAID ExpansionDDR5 Industrial Memory

  • Image analysis on the device

    AI-assisted diagnostics and patient identification should run next to the device, so that patient data does not leave the hospital.

    Our answer USB 2.0 Camera ModulesAPEX-P100APEX-P200 EXMU-X261AIP-FR68AIP-SQ67M3A2000-VY

Packaging and Cooling for Medical Devices

Our Medical Technology Coverage

Portable emergency ventilation device

Prevention & Emergency Care

Emergency & Portable Systems

Lightweight, robust mechanical solutions for emergency ventilation devices and field-use medical systems. POLYRACK's multi-component manufacturing approach is the industry standard for portable medical devices.

Recommended: IPC02 · EmbedTech · CasTech

Laboratory diagnostic device

Diagnostics & Laboratory

Analysis & Imaging

CompactPCI-based 19" enclosures and customizable front panel solutions for blood analyzers and CT control systems. Laser printing and surface treatment options for seamless brand integration.

Recommended: 19" Subrack cPCI · Space · Front Panels

Incubator — critical care system

Surgery & Intensive Care

Critical Care Systems

Multi-technology manufacturing combining sheet metal, thermoplastics and die-cast aluminum for incubators, cardiac arrhythmia treatment systems and intensive care monitors.

Recommended: IPC02 · PanelPC 2 · Pada Cold Plate

Portable patient monitor

Post-Discharge & Home Care

Portable & Home Devices

Lightweight, ergonomic and durable enclosure designs. Long-lifecycle, cost-efficient series production using single and three-component thermoplastic injection technology.

Recommended: EmbedTech SFF · Space · Sheen Thermal Pad

From Concept to Series Production

  1. Concept & Consulting

    Technical requirements, cost targets and technology selection

  2. Design & Simulation

    CAD, thermal simulation, FEM and CE/UL certification preparation

  3. Prototype & Validation

    First samples, functionality testing and process compliance documentation

  4. Series Production

    Long-term stable production and supply continuity assurance

A medical device is approved as a whole, so we plan its components together: the POLYRACK enclosure sets the hygiene and EMC base, Pada, Sheen and YCC Fan take the heat out of it quietly, and Innodisk storage, memory and AI systems keep patient data safe inside it.

  1. 01 Enclosures and Clinical Interface Hygienic, EMC-ready mechanics and the touch interface at the bedside or on the device. POLYRACK
  2. 02 Cooling at the Component Heat is removed where it is generated, at power electronics, laser modules and processors; Pada also designs heat sinks and heat pipes for air-cooled devices. Pada EngineeringSheen
  3. 03 Quiet Airflow DC fans chosen for the airflow of the device and its noise target, so equipment near patients stays quiet. YCC Fan
  4. 04 Patient Data and Storage Logs, images and measurement data are protected against drive failure and memory errors. Innodisk
  5. 05 Imaging and AI Diagnostics Cameras and AI systems evaluate images next to the device, without sending patient data to the cloud. Innodisk

The Medical Device, Layer by Layer

Each card shows the product's role in the medical device and the requirements it answers; the product page has the full specifications. 18 products across 6 layers are recommended: POLYRACK (3), Pada Engineering (1), Sheen (2), YCC Fan (2), Innodisk (7), Aetina (3).

01

Enclosures and Clinical Interface

Hygienic, EMC-ready mechanics and the touch interface at the bedside or on the device.

02

Cooling at the Component

Heat is removed where it is generated, at power electronics, laser modules and processors; Pada also designs heat sinks and heat pipes for air-cooled devices.

03

Quiet Airflow

DC fans chosen for the airflow of the device and its noise target, so equipment near patients stays quiet.

04

Patient Data and Storage

Logs, images and measurement data are protected against drive failure and memory errors.

05

Imaging and AI Diagnostics

Cameras and AI systems evaluate images next to the device, without sending patient data to the cloud.

EXMU-X261 Machine Vision Kit

Innodisk · AMD Xilinx · machine vision kit

EXMU-X261

The FPGA route for vision beside the device: it processes one to four 2 MP video streams in parallel at up to 20 fps with sub-30 ms latency, ships with a ready BSP and pre-trained models, and draws around 17.6 W.

Expectations It Answers Image analysis on the device

View Product
06

In-Hospital AI and Imaging with Aetina

Edge AI platforms used in Aetina's hospital and medical imaging references.

AIP-FR68

Aetina · MegaEdge · PCIe series

AIP-FR68

In Aetina's hospital reference the agentic AI runs in the consulting room: no additional server room is required and every stage of processing stays on the hospital network.

Expectations It Answers Image analysis on the device

View Product
AIP-SQ67

Aetina · MegaEdge · MXM series

AIP-SQ67

A customer of Aetina uses this platform with the MXM M3A2000-VY in a medical computer system that shows surgical images as real-time 3D stereoscopic images.

Expectations It Answers Image analysis on the device

View Product

The Manufacturers Behind Your Medical Device

Pada Engineering

Heat SinkCold PlateHeat Pipe

With Pada Engineering, we provide cold plate design, engineering services and supply for power electronics applications. With its innovative product approach and industry experience, Pada Engineering is a major player in the European heat sink market, serving a wide range of sectors including power electronics, renewable energy, medical, e-mobility, rail transportation, defence and RF signal processing.

Pada Engineering Products

POLYRACK Electronic-Aufbausysteme GmbH

19" SubrackEnclosuresPanel PCCompactPCI / VMEbus / OpenVPX45+ Years of Experience

With POLYRACK Electronic-Aufbausysteme GmbH, we offer integrated packaging solutions for the widest range of applications in the electronics industry. With more than 45 years of engineering expertise and relationships of trust with the world's leading electronics brands, POLYRACK operates on a global scale, from Europe to Asia and from North America to the Turkish market.

The product range covers 19" subrack and enclosure families, industrial PC and panel PC systems, CompactPCI / VMEbus / OpenVPX backplanes, DIN rail modules and customer-specific system platforms. Custom designs developed on the basis of standard catalogue products combine the cost advantage of series production with the flexibility of individual customer requirements. POLYRACK has a multi-technology manufacturing infrastructure including metal and plastic processing, aluminium extrusion and die-casting, plastic injection moulds, surface treatment, electronic assembly and logistics.

POLYRACK Industrial Products

Sheen Electronic Technology

Thermal PadThermal TapeThermal AdhesiveGap FillerUL · CE · ISO9001

With Sheen Electronic Technology, we offer a broad portfolio of thermal interface products including thermal pads, tapes, liquids, adhesives and gap fillers. Certified to UL, CE, ISO9001, ISO 14001 and IATF16949, Sheen is an established thermal materials manufacturer with extensive international references.

Sheen Electronic Technology Products

YCCFAN Technology

Axial FanCentrifugal FanAC / EC / DCCustom Solutions

YCCFAN Technology is a leading brand specialising in high-performance axial and centrifugal fans for a wide range of industries. Together with YCCFAN, which offers application-specific solutions with AC, EC and DC fan types, we design ventilation systems optimised for customer needs.

YCC Fan Products

Innodisk

Industrial SSDDRAM ModulesCamera ModulesNetwork CardsEdge AI Systems

With Innodisk, we offer industrial-grade flash storage, DRAM modules, embedded camera modules, network and I/O expansion cards and edge AI systems. Founded in Taiwan in 2005, Innodisk designs its products for extreme temperatures, shock and vibration, unstable power and long product life cycles; we integrate them into the enclosures and thermal solutions of our other brands.

Innodisk Products

Aetina

Edge AI SystemsMXM GPU ModulesPCIe GPU CardsAI ServersRemote Management

With Aetina we offer Jetson-based edge AI systems, in-vehicle AI computers, GPU-expansion workstations, short-depth 2U AI servers and MXM / PCIe GPU cards. Founded in Taiwan in 2012 and part of the Innodisk Group since 2013, Aetina develops field-ready edge AI solutions; as its authorised distributor in Türkiye we plan these systems together with our enclosure and thermal solutions.

Recommended in this sector: AIP-FR68, AIP-SQ67, M3A2000-VY

Aetina Products
Plastic Injection Moulding and Custom Mechanics

POLYRACK TECH-GROUP · Project-Based Manufacturing

Plastic Injection Moulding for Medical Devices

POLYRACK TECH-GROUP manufactures the parts and assemblies that form the mechanical basis or the design covers of devices used in emergency ventilation, intensive care, patient monitoring and surgery: one- and three-component moulding, wet-painted foamed thermoplastic (TSG) covers, die casting and laser-welded sheet-metal assemblies, from the early development stages to series production.

View Service

Why Björn Tech?

Single Supplier Advantage

From mechanical packaging to thermal management — one order, one invoice, one technical contact. Simplifies the supply chain for medical projects.

Custom Development Support

Standard products are the starting point. Custom dimensions, surface finishes and EMC shield concepts are developed together with POLYRACK engineers.

Fast Supply & Technical Support

As the authorized distributor for Türkiye, we offer fast delivery on stock items and on-site technical consulting services.

Talk to our engineering team about your project.

Contact Us

Other Sectors

Data CentreEdge AI ApplicationsSmart Cities & SecurityRetail & LogisticsGreen EnergyMeasurement & ControlE-MobilityAutonomous Systems & RoboticsDefence IndustryRailway & TransportationTelecommunicationsIndustrial AutomationIndustrialMultimedia & BroadcastingSmart Farming